| L163110EC Timken Tapered Roller Bearings | D:620 mm; Limiting speed:1000 r/min; d2 ≈:463.16 mm; Reference speed:1000 r/min; Calculation factor Y0:0.52; Fatigue load limit Pu:20 kN; Calculation factor X:0.35; r1,2 min.:5 mm; a:263 mm; d1 ≈:498.4 mm; Calculation factor Y2:0.57; Calculation factor e:1.14; B:90 mm; Calculation factor Y1:0.55; D1 ≈:546.7 mm; Mass bearing:88 kg; Basic static load rating C0:1060 kN; rb max.:2 mm; |
| HM535310EW Timken Tapered Roller Bearings | Taconite seal:TER 155; H:398.462 mm; Cap bolt, SAE grade:8; P90°:249 kN; L:711.2 mm; P180°:160 kN; Da:339.999 mm; J1:114.3 mm; h:61.913 mm; Cap bolt recommended tightening torque:1735.4 N·m; P120°:151 kN; Mass pillow block:217 kg; R2:42.069 mm; R1:120.65 mm; Appropriate attachment bolt size G:1.25 in; Cap bolt:1 1/8-7 UNC; S:4.763 mm; Initial grease fill:1672.65 g; J min.:549.275 mm; |
| 2TSDM Timken Tapered Roller Bearings | N1:15.875 mm; Stabilizing ring:SR-15-0; Labyrinth ring:2 x LOR 38; H2:30.163 mm; End plug (suffix Y):EPR 7; Ca:37.008 mm; Cap bolt:2 x 1/2-13 UNC; H1:82.55 mm; Da:130 mm; Housing:FSAFS 515; H:161.925 mm; A1:79.375 mm; J min.:219.075 mm; P90°:45.4 kN; R1:46.038 mm; P180°:30.7 kN; ba:32.544 mm; A2:120.65 mm; Max. speed for PosiTrac Plus seal:2350 r/min; Appropriate attachment bolt size G:0.5 in; |
| Y20S94113 Timken Tapered Roller Bearings | Housing Material:Cast Iron; Housing Coating:Powder Coat; Ball Grade:Class 10; Base to Center Height:Not Applicable; Bearing Locking Device:Setscrew; Seal Type:Single Lip; Bearing Insert Material:Steel; Flinger Type:Rubberized; End Cap Groove:Yes; Shaft Attachment (2):Set Screw; Ball Bearing Housing Series:207 Series; Bearing Family:Setscrew Ball Bearin; Flinger Material:Steel; Ship Weight:2.99 LB; |
| TS Timken Tapered Roller Bearings | Hexagonal key size for grub screw N:3 mm; Fatigue load limit Pu:0.655 kN; A:35 mm; T:45.3 mm; d2:57 mm; Da:88.9 mm; J:130 mm; Basic dynamic load rating C:25.5 kN; B1:39.5 mm; H:156 mm; Limiting speed:5300 r/min; Housing material:Composite; Recommended diameter for attachment bolts, mm G:12 mm; A5:22 mm; A1:17 mm; L:96 mm; A3:3.2 mm; Thread grub screw G2:M6; Db:90 mm; Recommended tightening torque for grub screw:7.4 N·m; |
| Y7S672 Timken Tapered Roller Bearings | b:22.3 mm; d:360 mm; ra max.:4 mm; D1 ≈:524 mm; Basic dynamic load rating C:4515 kN; Basic static load rating C0:6950 kN; Da max.:580 mm; da min.:371 mm; K:12 mm; Calculation factor Y0:2.2; Limiting speed:1000 r/min; B:192 mm; r1,2 min.:5 mm; Mass bearing:215 kg; Fatigue load limit Pu:490 kN; Calculation factor Y2:3.4; D:600 mm; Calculation factor e:0.3; d2 ≈:436 mm; Reference speed:750 r/min; |
| Inne Timken Tapered Roller Bearings | Radial Clearance:0.013 to 0.028 mm; Enclosure:Open; a (max):3.3 mm; Static Load Rating:20,500 N; Groove Diameter:59.6 mm; Cy:4.7 mm; Fillet Radius/Chamfer:1 mm; Dx:68.5 mm; Configuration:Double Row; d:30 mm; da:36 mm; Bore Type:Cylindrical Bore; B:23.8 mm; Dynamic Load Rating:28,600 N; Groove Width:1.9 mm; Limiting Speed - Oil:9,500 rpm; Limiting Speed - Grease:7,000 rpm; Weight:0.290 kg; ra:1 mm; |
| 2TSIM Timken Tapered Roller Bearings | A2:193.675 mm; J min.:406.4 mm; Stabilizing ring:2 x SR-0-24; PosiTrac Plus contact element:2 x B10724-140; P90°:180 kN; J max.:434.975 mm; h:44.45 mm; H2:60.325 mm; P180°:127 kN; Appropriate attachment bolt size G:1 in; Cap bolt, SAE grade:8; P150°:105 kN; ba:64.294 mm; L:511.175 mm; P60°:301 kN; Labyrinth ring:2 x LOR 140; End plug (suffix Y):EPR 18; H1:152.4 mm; Da:259.999 mm; Ca:86.614 mm; |
| No. | Brand | s | H | h | b | T | C | a | K |
| Y9S6772 | Timken | - | - | - | - | - | - | - | - |
| JL730612B | Timken | - | 271 mm | - | - | - | - | - | - |
| M736149XC | Timken | - | - | - | - | - | - | - | - |
| HM535310ES | Timken | - | - | - | - | - | - | - | - |
| Oute | Timken | - | - | - | 10.5 mm | - | 76.2 mm | - | - |
| Inne | Timken | - | - | - | - | - | - | - | - |
| Inne | Timken | - | - | - | - | - | - | - | - |
| HH221410EE | Timken | - | - | - | - | - | - | - | - |
| Y4S90744 | Timken | - | - | - | - | - | - | - | - |
| HM535310EW | Timken | - | 398.462 mm | 61.913 mm | - | - | - | - | - |
| Inne | Timken | - | - | - | - | - | - | - | - |
| 2TSDM | Timken | - | 161.925 mm | - | - | - | - | - | - |
| Y7S29175 | Timken | - | 102 mm | - | - | - | - | - | - |
| Y1S4335 | Timken | - | - | - | - | 23 mm | 17.5 mm | - | - |
| Oute | Timken | - | - | - | - | 318.48 mm | - | - | - |
| Y1H414 | Timken | - | - | 142 mm | - | - | - | 8 mm | - |
| LM714110EA | Timken | - | - | - | - | - | - | - | - |
| K160929 | Timken | - | 102.5 mm | - | - | - | - | - | - |
| Y20S94113 | Timken | - | - | - | - | - | - | - | - |
| JYH14099R | Timken | - | - | - | - | - | - | - | - |
| Y5S3952 | Timken | - | - | - | 13 mm | - | 168 mm | - | 10 mm |
| HM516810ES | Timken | - | - | - | - | - | - | - | - |
| LL778110EA | Timken | - | - | - | - | - | - | - | - |
| 2TSIM | Timken | - | - | - | - | - | - | - | - |
| TS | Timken | - | - | - | - | - | - | - | - |
| K164781 | Timken | - | - | - | - | - | - | - | 3.5 mm |
| TDO | Timken | - | - | - | - | - | - | - | - |
K160929 Timken Tapered Roller Bearings Video
Tapered Roller Bearings | Roller Bearings | Products | NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in one
Tapered roller bearing - Wikipedia
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces
Tapered Roller Bearings | Fersa Bearings
Thrust tapered roller bearing, also known as T type bearings, allow for very compact axial arrangements, able to endure large axial loads. It is distinguished by its
What do you know about Tapered Roller Bearings? | Bearing
Jan 15, 2015 - Tapered roller bearings feature tapered inner and outer ring raceways with tapered rollers arranged between them, angled so the surface of the
Tapered Roller Bearings | The Timken Company
Timken® Tapered Roller Bearings. Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and
Tapered Roller Bearing/Product Information/Koyo Bearings
This page introduces tapered roller bearings. The tapered shape enables a long line contact, making this bearing suitable for applications with heavy load and
Tapered Roller Bearings | NTN Bearing
Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by