| JM734449A Timken Tapered Roller Bearings | dk:53 mm; Mass rod end:1.85 kg; d2 max.:94 mm; l7 min.:46 mm; l2 max.:199 mm; l1 min.:86 mm; d:40 mm; Basic static load rating C0:140 kN; α:6 °; r1 min.:0.6 mm; G:M 39x3; Material constant KM:330; Specific dynamic load factor K:100 N/mm²; h:150 mm; Basic dynamic load rating C:100 kN; C1 max.:24 mm; B:28 mm; |
| L623110EA Timken Tapered Roller Bearings | Enclosure:Open; Static Load Rating:222,000 N; Da (max):301 mm; Radial Clearance:0.063 to 0.117 mm; B:51 mm; da (min):209 mm; Factor fo:15.8; ra (max):2 mm; Configuration:Single Row; D:310 mm; Weight:13.900 kg; Fillet Radius/Chamfer:2.1 mm; Limiting Speed - Grease:2,000 rpm; Bore Type:Cylindrical Bore; d:200 mm; Limiting Speed - Oil:2,400 rpm; Dynamic Load Rating:202,000 N; |
| H961610EB Timken Tapered Roller Bearings | Mass adapter sleeve assembly:2.6 kg; d:120 mm; G:M 120x2; B4:22 mm; B1:88 mm; B:20 mm; Hydraulic nut:HMV 24 E; d3:145 mm; d1:106.362 mm; |
| K160929 Timken Tapered Roller Bearings | G1:21 mm; H1:89 mm; Basic static load rating C0:15.3 kN; H2:40 mm; Fatigue load limit Pu:0.655 kN; Recommended tightening torque for grub screw:6.5 N·m; B:42.9 mm; B4:6 mm; Grub (set) screw G2:5/16-24 UNF; L1:76 mm; Mass bearing unit:0.77 kg; A:34 mm; Hexagonal key size for grub screw N:3.969 mm; d:31.75 mm; L:125 mm; G:M16; s1:25.4 mm; Housing material:Composite for food a; H:102.5 mm; A1:12 mm; |
| Inne Timken Tapered Roller Bearings | r1:3 mm; da (min):89 mm; Db (max):162 mm; Outside Ring Inside Diameter:160.5 mm; Db (min):176 mm; dc (min):107 mm; Static Load Rating:274,000 N; dd (min):118 mm; d:75 mm; Radial Clearance:0.040 to 0.075 mm; Fillet Radius/Chamfer:3 mm; Limiting Speed - Grease:3,400 rpm; Dynamic Load Rating:262,000 N; Configuration:Single Row; Da (max):176 mm; D:190 mm; Limiting Speed - Oil:4,000 rpm; Enclosure:Open; |
| H247510EF Timken Tapered Roller Bearings | Pa:5.65 kN; Da:130 mm; Cap bolt:2 x 1/2-13 UNC; J min.:219.075 mm; Cap bolt recommended tightening torque:81.3 N·m; Ca:37.008 mm; H1:82.55 mm; H2:28.575 mm; J max.:244.475 mm; P120°:28 kN; Initial grease fill:136.08 g; PG:1/8 NPT; Max. speed for Taconite seal:1250 r/min; P90°:45.4 kN; End plug (suffix Y):EPR 7; Mass pillow block:13.1 kg; h:31.75 mm; Appropriate attachment bolt size G:0.625 in; |
| L68111EC Timken Tapered Roller Bearings | D1:123 mm; B:18.5 mm; Mass housing washer:3.39 kg; r1,2 min.:2.1 mm; D:210 mm; |
| Y1S38019 Timken Tapered Roller Bearings | Appropriate attachment bolt, rec. tightening torque:385 N·m; H1:95 mm; P150°:175 kN; A:120 mm; Pa:140 kN; db:75 mm; H2:32 mm; Cap bolt, rec. tightening torque:80 N·m; J:260 mm; P0°:350 kN; Q150°:125 kN; N1:22 mm; P180°:215 kN; Ca:58 mm; Da:140 mm; H:177 mm; N4 max.:8 mm; Locating ring:2 x FRB 12.5/140; P55°:430 kN; Q180°:110 kN; |
| No. | Brand | s | H | h | b | T | C | a | K |
| M736110ES | Timken | - | - | - | - | - | - | - | - |
| L624510EE | Timken | - | - | - | - | - | - | - | - |
| Oute | Timken | - | - | 6 mm | 14 mm | - | - | - | - |
| HM813811EB | Timken | - | - | - | - | - | - | - | - |
| LL771911EB | Timken | - | - | - | - | - | - | - | - |
| TS | Timken | - | - | - | - | - | - | - | - |
| Y2S351687 | Timken | - | - | - | - | - | - | 24.8 mm | - |
| 2TSDM | Timken | - | 161.925 mm | - | - | - | - | - | - |
| Y1S219117 | Timken | - | - | - | 6.5 mm | 65 mm | - | - | 4.5 mm |
| L68111EC | Timken | - | - | - | - | - | - | - | - |
| M736110ES | Timken | - | - | - | - | - | - | - | - |
| Inne | Timken | - | 222.25 mm | - | - | - | - | - | - |
| Oute | Timken | - | - | - | - | - | - | - | - |
| K167807 | Timken | - | 60 mm | - | - | - | - | - | - |
| Oute | Timken | - | - | - | 10.5 mm | - | 76.2 mm | - | - |
| HM807012ES | Timken | - | - | - | - | - | - | - | - |
| Y6S7485 | Timken | - | - | - | - | - | - | - | - |
| Space | Timken | - | - | - | - | - | - | - | - |
| Y1S36626 | Timken | - | - | - | - | - | - | - | - |
| TS | Timken | - | - | - | - | - | - | - | - |
| HH926710EA | Timken | - | - | - | - | - | - | - | - |
| LM757010EC | Timken | - | - | - | - | - | - | - | - |
| Y1S38019 | Timken | - | 177 mm | - | - | - | - | - | - |
| TS | Timken | - | - | - | - | - | - | - | - |
| TS | Timken | - | - | - | - | - | - | - | - |
| JY21523RM | Timken | - | - | - | - | - | - | - | - |
| K167208 | Timken | - | 338.137 mm | 47.625 mm | - | - | - | - | - |
| LM654611EA | Timken | - | 209.55 mm | 46.038 mm | - | - | - | - | - |
| Y1S6532 | Timken | - | - | - | - | - | - | - | - |
| Y8S647 | Timken | - | - | - | - | - | - | - | - |
K165765 Timken Tapered Roller Bearings Video
What do you know about Tapered Roller Bearings? | Bearing
Jan 15, 2015 - Tapered roller bearings feature tapered inner and outer ring raceways with tapered rollers arranged between them, angled so the surface of the
Tapered Roller Bearing/Product Information/Koyo Bearings
This page introduces tapered roller bearings. The tapered shape enables a long line contact, making this bearing suitable for applications with heavy load and
Tapered Roller Bearings | NTN Bearing
Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and
Tapered Roller Bearings | Fersa Bearings
Thrust tapered roller bearing, also known as T type bearings, allow for very compact axial arrangements, able to endure large axial loads. It is distinguished by its
Tapered roller bearing - Wikipedia
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces
Tapered Roller Bearings | The Timken Company
Timken® Tapered Roller Bearings. Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most
Tapered Roller Bearings | Roller Bearings | Products | NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in one