| JYH9508P Timken Tapered Roller Bearings | Enclosure:Open; B:8 mm; Weight:0.024 kg; D:28 mm; Radial Clearance:0.011 to 0.025 mm; Configuration:Single Row; Bore Type:Cylindrical Bore; Groove Diameter:26.7 mm; r1:0.3 mm; Limiting Speed - Oil:32,000 rpm; Cy (max):1.9 mm; Da (max):26 mm; Fillet Radius/Chamfer:0.3 mm; da (min):14 mm; Factor fo:13.5; Dx (min):31.5 mm; ra (max):0.3 mm; d:12 mm; Dynamic Load Rating:5,100 N; a (max):1.4 mm; |
| HM231110EE Timken Tapered Roller Bearings | Calculation factor (back-to-back, face-to-face) Y2:1.41; Db max.:90.8 mm; Calculation factor f2B:1.03; Calculation factor f2C:1.06; Calculation factor f:1.08; Preload class A GA:150 N; Attainable speed for grease lubrication:22000 r/min; d:60 mm; Preload class C GC:870 N; Mass bearing:0.39 kg; a:27.3 mm; r1,2 min.:1.1 mm; Preload class B GB:440 N; B:18 mm; Calculation factor fHC:1.01; r3,4 min.:0.6 mm; |
| LM508710ES Timken Tapered Roller Bearings | Housing:SSAFS 524; P150°:87.2 kN; P180°:107 kN; h:46.831 mm; P120°:94.3 kN; P90°:149 kN; Labyrinth ring:2 x LOR 113; A1:120.65 mm; End plug (suffix Y):EPR 14; Bearing limiting speed:3800 r/min; da:106.362 mm; Initial grease fill:379.89 g; Stabilizing ring:SR-24-20; H1:133.35 mm; Cap bolt, SAE grade:8; Mass pillow block:64 kg; R1:79.375 mm; A2:190.5 mm; PG:1/4 NPT; ba:53.181 mm; |
| K162854 Timken Tapered Roller Bearings | Static Load Rating:263,000 N; Nr. of Holes:4; d:55 mm; ra (max):2 mm; Enclosure:Open; da (min):65 mm; Roller Profile:Symmetric; Bore Type:Tapered Bore; Weight:2.400 kg; Constant e:0.36; Axial Load Factor Y2:2.75; D:120 mm; Dynamic Load Rating:325,000 N; Groove Width A:8 mm; Radial Clearance:0.075 to 0.095 mm; Limiting Speed - Grease:4,200 rpm; Configuration:Double Row; Axial Load Factor Y1:1.85; Da (max):110 mm; |
| H247510EF Timken Tapered Roller Bearings | Pa:5.65 kN; Da:130 mm; Cap bolt:2 x 1/2-13 UNC; J min.:219.075 mm; Cap bolt recommended tightening torque:81.3 N·m; Ca:37.008 mm; H1:82.55 mm; H2:28.575 mm; J max.:244.475 mm; P120°:28 kN; Initial grease fill:136.08 g; PG:1/8 NPT; Max. speed for Taconite seal:1250 r/min; P90°:45.4 kN; End plug (suffix Y):EPR 7; Mass pillow block:13.1 kg; h:31.75 mm; Appropriate attachment bolt size G:0.625 in; |
| M249710EX Timken Tapered Roller Bearings | b:11.5 mm; d:100 mm; da min.:108.1 mm; Da min.:141.5 mm; B:85 mm; dk:140 mm; Design (sliding contact surface combination):Steel/steel; Mass plain bearing:6.8 kg; M:5 mm; Material constant KM:330; Da max.:153.3 mm; α:13 °; r2 min.:1 mm; ra max.:1 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:655 kN; b1:11.5 mm; da max.:111.2 mm; r1 min.:1 mm; C:55 mm; |
| TS Timken Tapered Roller Bearings | Hexagonal key size for grub screw N:3 mm; Fatigue load limit Pu:0.655 kN; A:35 mm; T:45.3 mm; d2:57 mm; Da:88.9 mm; J:130 mm; Basic dynamic load rating C:25.5 kN; B1:39.5 mm; H:156 mm; Limiting speed:5300 r/min; Housing material:Composite; Recommended diameter for attachment bolts, mm G:12 mm; A5:22 mm; A1:17 mm; L:96 mm; A3:3.2 mm; Thread grub screw G2:M6; Db:90 mm; Recommended tightening torque for grub screw:7.4 N·m; |
| HM516810ES Timken Tapered Roller Bearings | Limiting Speed - Grease:3,800 rpm; D:170 mm; dc (min):128 mm; Configuration:Single Row; Bore Type:Cylindrical Bore; Static Load Rating:174,000 N; Dynamic Load Rating:131,000 N; Enclosure:Open; d:110 mm; ra1 (max):1 mm; db (min):117 mm; Weight:2.340 kg; r1:1.1 mm; B:28 mm; Da (max):160 mm; Fillet Radius/Chamfer:2 mm; Radial Clearance:0.050 to 0.090 mm; db (max):124 mm; ra (max):2 mm; Limiting Speed - Oil:4,500 rpm; |
| No. | Brand | s | H | h | b | T | C | a | K |
| M249710EX | Timken | - | - | - | 11.5 mm | - | 55 mm | - | - |
| Inne | Timken | - | - | - | - | - | - | - | - |
| M207010ES | Timken | - | - | - | - | - | - | - | - |
| Inne | Timken | - | - | - | - | - | - | - | - |
| Y1H414 | Timken | - | - | 142 mm | - | - | - | 8 mm | - |
| Y17S7485 | Timken | - | - | - | - | - | - | - | - |
| Y7S4822 | Timken | - | - | - | - | - | - | - | - |
| Oute | Timken | - | - | - | - | 91 mm | - | 75.194 mm | - |
| Y1S655 | Timken | - | - | - | - | - | - | - | - |
| Y5S672 | Timken | - | - | - | - | - | - | - | - |
| Inne | Timken | - | - | - | - | - | - | - | - |
| Space | Timken | - | - | - | - | - | - | - | - |
| Y1S90744 | Timken | - | - | - | 2.7 mm | - | 2.87 mm | - | - |
| LL483418EA | Timken | - | - | - | - | - | - | - | - |
| M736110ES | Timken | - | - | - | - | - | - | - | - |
| Y1S219117 | Timken | - | - | - | 6.5 mm | 65 mm | - | - | 4.5 mm |
| HH926716EB | Timken | - | - | - | - | - | - | - | - |
| H715311EA | Timken | - | 495.3 mm | - | - | - | - | - | - |
| H913810ES | Timken | - | - | - | - | - | - | - | - |
| TS | Timken | - | - | - | - | - | - | - | - |
| Y1S3821 | Timken | - | - | - | - | - | - | - | - |
| HM720210ES | Timken | - | 298.45 mm | - | - | - | - | - | - |
| Y4S642 | Timken | - | - | - | - | - | - | - | - |
| Y4S382A | Timken | - | - | - | - | - | - | - | - |
| HH224310EX | Timken | - | - | - | - | - | - | - | - |
| K161994 | Timken | - | - | - | - | - | - | - | - |
| Oute | Timken | - | - | - | - | - | - | - | - |
| M515610ES | Timken | - | - | - | - | - | - | - | - |
| LM603011EX | Timken | - | 118 mm | - | - | - | - | - | - |
| M734410EB | Timken | - | - | - | - | - | - | - | - |
Y3S299711 Timken Tapered Roller Bearings Video
Tapered Roller Bearing/Product Information/Koyo Bearings
This page introduces tapered roller bearings. The tapered shape enables a long line contact, making this bearing suitable for applications with heavy load and
Tapered Roller Bearings | Roller Bearings | Products | NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in one
Tapered Roller Bearings | NTN Bearing
Tapered roller bearings utilize conical rollers and raceways, arranged so that the rollers and raceways meet at a common apex. The rollers are guided by
Tapered roller bearings - features, benefits, applications | SKF
SKF Tapered roller bearings feature a cup and cone assembly. The cup is comprised of the outer ring and the cone assembly consists of inner ring, rollers, and
Tapered Roller Bearings | Fersa Bearings
Thrust tapered roller bearing, also known as T type bearings, allow for very compact axial arrangements, able to endure large axial loads. It is distinguished by its
What do you know about Tapered Roller Bearings? | Bearing
Jan 15, 2015 - Tapered roller bearings feature tapered inner and outer ring raceways with tapered rollers arranged between them, angled so the surface of the
Tapered Roller Bearings | The Timken Company
Timken® Tapered Roller Bearings. Timken® tapered roller bearing assemblies are precisely designed to manage both radial and axial loads, even in the most
Tapered roller bearing - Wikipedia
Tapered roller bearings are rolling element bearings that can support axial forces (i.e., they are good thrust bearings) as well as radial forces